Guided Cylinders
Overwiev
We offer different guided cylinders that can be used in applications where space is limited. The cylinders are available with slide bearings or ball bushes for high precision moving even for fast cycles. The cylinders are available with a mechanical stopper, or with shock absorbers for reducing the end shock at the end of the stroke.
Double shaft guided cylinders
The double shaft guided cylinders are suitable for use in very limited space. The cylinders are available with sintered bronze bushes when the side loads are high, or with linear ball bearings, when need it high precision and fast cycling. The cylinders are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the mounting of the cylinder using either top, bottom or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions.
Features
- Compact design
- Anodized AL body
- Zinc-plated steel flange
- Rolled stainless steel AISI 303 piston rod
- Rolled stainless steel 420B guide rods for sintered bronze bushes
- Hardened steel C50 guide rods for linear ball bearings
- With magnet for sensing the piston position
- Double acting version
- Diameter: 20, 25, 32, 40, 50, 63 mm
- With fixed cushioning
- lube-free operation
- Threaded and non-threaded holes in the body for mounting
Double Pistons Cylinders
We offer double pistons cylinders that have been designed to be used in applications where space is limited. Regarding the bearings, the slide units are available in two versions, one with double sintered bronze bushes and the other with double linear ball bearings The bronze bushes version would normally be selected when the side loads applied to the slide unit are high. Linear bearings are suitable for fast cycles (less sideload) and higher precision. The cylinders are available with fixed mechanical cushions or with one shock absorber located centrally on the rear flange or with two shock absorbers located on the body. The versions with shock absorbers are suitable for handling of higher mass forces and/or when it is necessary to adjust the stroke.
Features
- Guided with double bearings and double flanges
- Anodized AL body
- Zinc-plated steel flange
- Rolled stainless steel AISI 303 piston rod
- Rolled stainless steel 420B guide rods for sintered bronze bushes
- Hardened steel C50 guide rods for linear ball bearings
- With magnet for sensing the piston position
- Double acting version
- Diameter: 20, 25, 32, 40 mm
- Available with fixed mechanical cushions or with one shock absorber located centrally on the rear flange or with two shock absorbers located on the body
- With the shock absorber the stroke is adjustable
- lube-free operation
- Threaded and non-threaded holes in the body for mounting
Actuators
We offer actuators for a wide range of solutions covering a great number of applications that require a guided linear movement. The design of the double piston, besides assuring a solid and effective guide, offers double force in compact dimensions. Where a high force with precise movement is required, along with a non-rotation function and integrated guide, these cylinders are the ideal solution.
Features
- Compact design
- Anodized AL body and flange
- Rolled stainless steel AISI 303 piston rod for sintered bronze bushes
- Hardened steel C50 piston rod for linear ball bearings
- Without magnet
- Double acting single flange, or through-rod with double flange version
- Diameter: 10, 16, 20, 25, 32 mm
- With fixed mechanical cushion
- lube-free operation
- Threaded holes in the body for mounting
Downloads
News
Gruetzner G-LUBE
Cost-effective, reliable, safe and ecological. G-LUBE is an electronically controlled and single-point lubrication system, driven by a chemical reaction. The…
Gruetzner IND 220
The lightest portable induction heater in the world Avoid premature bearing failures due to damage caused by improper mounting!The workpiece…
Enidine Wire Rope Isolators for Vibration Isolation
High Performance Vibration Damping Look to Enidine for high performance vibration isolation components such as Wire Rope Isolators and Compact…
Tech-Con is the official distributor of AirTAC
We are the official distributor of AirTAC pneumatic components in Czech Republic. AirTAC International Group, headquartered in Taiwan, established in…
Enidine Adjustable Miniature Shock Absorber
Miniature Shock Absorbers for Limited Space Applications Enidine Adjustable Small Bore Hydraulic Series miniature shock absorbers offer the most flexible…
THK High Temperature LM Guide RSX-M1
Miniature LM Guide for use in temperatures as high as 150°C The Model RSX-M1 utilizes unique material, lubrication, and heat…
Kinetrol D-Line Damped Manual Fail-Safe
The D-Line damped manual fail-safe uses Kinetrol’s highly reliable, low stress, clock type spring linked to a torque multiplier to…
UR10e
Medium-sized, versatile cobot The UR10e is our medium duty industrial collaborative robot that combines both long reach and high payload.…
Flotronic® Barrel Unloading System
The Flotronic Barrel Unloading System combines our unique ‘One Nut’ Sanitary Air-Operated Double-Diaphragm Pump with our Barrel Unloading Skid; perfect…
Check out our online store
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Lorem ipsum dolor
Subscribe to our newsletter
Be the first one to find out about our latest products and solutions!
[mc4wp_form id="348"]